DUOYI DY26A Ultrasonic Leak Location Determine Meter Car Window Sealing Flaw Gas Vaccum Pressure Locator Sound Light Alarm
Dear friends, the following is the difference between DY26 and DY26A
DY26 is suitable for testing leaks in confined spaces.
1. Put the transmitter DY26-T into a closed container to be tested.
2. Adjust the sensitivity of the receiver's DY26-R (you can adjust the sensitivity to the maximum at the beginning), and then hold the receiver DY26-R to slowly move along the measured object and listen to the sound from the headphones.
3. The closer to the point of the leak, the louder the headphones. (At this time you can adjust the sensitivity appropriately)
DY26A is suitable for various leaks and has a 420mm probe.
1. Adjust the sensitivity of DY26A, hold DY26A slowly moving around the measured object,
2. The closer to the point of the leak, the louder the sound from the headphones.
If you are still not sure which one is better, you can consult the seller. Leave me a message. I will reply you as soon as possible.
DY26A is designed to locate leaks in pressure and vacuum system.
It can be used to detect and locate the source of the ultrasonic emission generated by gas or liquid f1owing through a small restrictive opening.
lt uses the advanced ultrasonic sensing technique and features small size, light weight;reliable detection, easy use and utility.
If you are outside, hold the DY26A along the object to measure the leak, you can find the leak location
If you are in a sealed container, you should check if the container is leaking. Choose DY26
1. Sense pressurized leaks, detects electrical arcing, and finds falling solenoids, valves and bearings .
2. Comes with a transmitter that emits an ultrasonic frequency to help locate leaaks that are not pressurized.
Enough to emit frequencies the detector can pick up.(Only DY26)
3. Detects any pressurized leaking gas, including chlorofluoro carbon(CFCs), hydrofluoro carbon(HFCs),
nitrogen(Ni), carbon dioxide(CO2) and steam.
Alarm Indication: The”LEAK” LED lights and the”ticking tone” increases in frequency.
Frequency Response: 40kHz ± 2kHz
Operating Condition: temperature:0°C – 40°C
Relative humidity: <80%
Battery: 9V, 6F22 or equivalent
Weight: about 240g
1.There are many factors involved in the ultrasonic leak detection, such as the pressure within the vessel under test,
hole shape, hole size, temperature etc. In some cases, the ultrasonic sound caused by leak is very weak,
so you should set the DY26A's sensitivity to the highest level at the beginning of leak detection.
2.If the detected ultrasonic sound is too intense so that it is impossible to pinpoint the leak because the” ticking tone”
is too high in frequency, you should decrease the sensitivity with the sensitivity knob.
3.In noisy environments, you can decrease the sensitivity appropriately to exclude the disturbance caused by noise.
4.When DY26A detects ultrasonic sound, move its probe around the suspected leak to determine
whether the detected ultrasonic sound is from the suspected leak or from other areas.
5.Because ultrasonic sound attenuates rapidly when it travels over distance, move the probe of DY26A
as close as possible to the suspected leak, remember to decrease the sensitivity if necessary.
During location, move the probe slowly.
1. We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2.Payment must be made within 3 days of order.
3. If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. All orders will be shipped out within 3 working days after we have successfully received your payment.
3. We offer regular Post Air Mail and have set up free shipping methods.
4. Since the trade is trans-national, as well as airmail is the cheapest shipping method, it will take a long time for delivery. If you don’t want to wait such a long time, please choose Express and pay the fee.
5. We are not responsible for your Customs duty.
1. If items are found in bad condition when received, please contact us freely. We can refund the money or resend a new one to you.
2. If you are not satisfied with the product because of personal preference, you can return it to us within 7 days. You need to pay the freight.
3.All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
1.12 months warranty
2.If you are not satisfied when you receive your item or with quality problem,please contact us,we can offer return or resend warranty but please offer evidence to show the problem actively.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.