Underground Metal Detector

Product parameters:

1. Battery: 6 AAA batteries (not including battery)
2. Current: minimum ~ 30mA maximum ~ 60mA
3. Working voltage: 7.1 ~ 9.6v
4. Signal frequency: 7.5KHz +/- 1KHz
5. Working environment: -20 ℃ ~ 60 ℃
6. Dimensions: (mm) 550 (length) × 205 (width) × 130 (high)
7. Gross weight: 3kg
8. Net weight: 1.37kg

Indoor use:
* Open the detector, then the detector should be in normal working condition.
* Place the detector on the table, remove the metal objects you wear, such as: watch rings and so on.
* Adjust the probe plate so that the detection surface faces the ceiling.
* Keep the probe at 2-3 inches above the probe plate and slowly sweep the probe.

Outdoor trial:
* Open the detector, then the detector should be in normal working condition.
* Find a ground outside the metal without metal objects.
* Bury the target in the ground, the distance between the target should be 1-2 feet.
* Keep the probe disc at a distance of 1 to 2 inches and move the detector slowly at the detection target burial.
* When the target is detected, the detector will sound the image on the LCD screen to start flashing.
* Slowly lift the probe, the depth icon on the LCD screen rises.
* If the rectangular aperture jumps from one target pattern to another or vice versa when detecting the target, the detected target may not be on the display or the detection area

​​